DT Research DT398 Основний посібник з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Основний посібник з експлуатації для Планшет DT Research DT398. DT Research DT398 7 сторінок. Mobile tablet

DT398

Start Up

If the power up (from Standby or otherwise) is successful, the appropriate interface will be displayed after a

launch sequence of several seconds.

Configuring the Mobile Tablet

The device may be configured using the utilities and methods dictated by the software operating system. The

DT398 should be configurable for various properties such as user profiles, network features, and several system

elements.

Calibration

The touch display for the DT398 is calibrated before shipping. In the event that the calibration has been modified

or is unsatisfactory, the respective calibration routines (e.g., PenMount (PM) to calibrate the touch interface may

be used. Such applications are typically executed through touch input via Stylus or through mouse click via a

USB mouse.

Brightness Control

To control the screen brightness, launch the System Utility. The System screen will display a Brightness control

section with up and down arrows that can be activated with the stylus.

The DT398 is equipped with an internal 1880mAh Li-Ion battery pack that is capable of supporting approximately

3 - 4 hours of continuous operation. With the internal battery and an external battery pack that clips

(hot-pluggable) onto the back of the device, the maximum period of continuous operation will be approximately 6

- 8 hours. The period between battery recharges can be significantly lengthened by putting the device into

Standby mode through the Power Button (see Buttons Function Table) whenever the device is not in use.

Depending on the operating software, the DT398 may also be configured to enter various power-saving modes

via the Power Button or through timed entry.

ENGLISH