DT Research DT395CR Основний посібник з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Основний посібник з експлуатації для Сенсорні термінали DT Research DT395CR. DT Research DT395CR 4 сторінки. Mobile pos tablet
Також для DT Research DT395CR: Основний посібник з експлуатації (10 сторінок), Основний посібник з експлуатації (4 сторінок)
Друкувати сторінку
DT395CR
Power/Battery LED Status:
•
Blue indicates the battery is 25% to 100% charged
•
Blinking blue indicates the battery is charging
•
Orange indicates that the battery is between 11% to 25%
•
Blinking orange indicates that the battery is below 10%
•
Blinking blue and orange alternately indicates the battery is being warmed up. Do not
unplug the AC/DC adapter.
Precautions
•
Always exercise care when operating and handling the DT395CR.
•
Do NOT apply excessive pressure to the display screen.
•
We recommend using the Stylus (optional) to keep the screen clean.
• void prolonged exposure of the display panel to any strong heat source. Wherever
A
possible, the DT395CR should face away from direct light to reduce glare.
•
If the AC-DC power adapter is used to recharge or power the
AC-DC adapter other than the one provided with the tablet or acquired from the
manufacturer or its partners.
•
In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power off the DT395CR and disconnect all power sources. Report the
problem to your device provider immediately.
•
Never attempt to disassemble the DT395CR, as this will void the warranty.
Basic Features
The DT395CR wireless tablet integrates a bright and responsive touch display, 1 USB port,
and embedded networking elements such as wireless LAN or optional 4G. The DT395CR
is complemented by a suite of accessories, including battery expansion, docking cradles,
and wall/ vehicle mount cradles, for a comprehensive user experience.
A DT395CR typically integrates an 802.11ac wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your DT395CR does not come with
such a network adapter, please consult your device provider to establish the desired
network connectivity.
6
ENGLISH
tablet, do NOT use any
USING THE DT395CR
Peripherals Support
Through its USB port, the DT395CR supports a wide range of USB-based peripherals.
These peripherals are applicable for software installation, applications storage, data
storage, docking or software recovery and update.
The DT395CR is complemented by an optional Desktop Cradle or Wall/ Vehicle Mount
Cradle for support, pass-through charging, and connection to a range of USB peripherals,
including keyboard and mouse. The Cradles offer the following interfaces: a DC-in
port for the AC-DC adapter, an Ethernet port and USB ports. Always seat the DT395CR
securely onto the cradle. The cradle must be powered by the AC-DC adapter for the
Ethernet and USB ports to function. The battery packs on the DT395CR may be recharged
by connecting the AC-DC adapter directly to the DC-in port on the DT395CR or through
the DC-in port on the Cradle while the DT395CR is docked.
Remote Management
Depending on software configuration, the DT395CR can be centrally managed for asset
monitoring and for software control. Please consult your device provider.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research
website.
If the DT395CR comes with a 4G module, please contact your product and/or service
provider for the SIM Card installation procedures.
To Hold the Tablet
Left hand: grip the left back side of the tablet
with your left hand four index fingers, with thumb
resting on the top of the back side of the tablet and
palm securely against the back.
Right hand: grip the right back side of the tablet
with your right hand four index fingers, with thumb
resting on the top of the back side of the tablet and
palm securely against the back.
7
ENGLISH