DTC CHAmp-PC30 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач DTC CHAmp-PC30. DTC CHAmp-PC30 4 сторінки. Portable wireless amplifier with dvd, usb & sd-card player and pitch control

Друкувати сторінку

2. Operating Instructions

Using the UHF Wireless Microphone

Open the battery compartment of wireless hand-held mic or belt-pack transmitter mic

and insert supplied 2 x AA type batteries in their correct +/- polarity.

Set Ch-number of amplifier and microphone both to same number by Ch-selector

switch using supplied plastic "I" screw driver. ( Please see the schematic below )

Clockwise insert the supplied BNC wireless antenna into it's socket on the operating panel.

Plug your wired microphone into the combination jack on the operating panel.

Turn on the main power on/off switch. Power-on LED will be illuminated.

Adjust the volume level of wired mic and try while setting treble/bass to proper level.

Adjust the volume level of wireless mic on the amplifier. Turn on the switch of wireless

mic and try. The on-air LED next to the Ch-selector switch will be illuminated.

In the case of frequency interference occurring, try to set Ch to another Ch-number.

Use the aux in/out RCA jack to feed out or feed in audio signals to and from another source.

Using the Wired Microphone

Turn on the main power on/off switch, the power-on LED will be illuminated

Plug 1/4" plug into the wired mic socket and adjust the volume using the wired mic volume knob.

(see number 6 and 9) on the operating panel.

NOTE: Wired microphones are also as sensitive to feedback as wireless microphones, therefore it is advisable to follow the same advice as in the

above information for optimum performance

Using Auxiliary Equipment

Use the Aux in/out jack connection to feed in or out audio signals from another source

Typical sources to feed into the amplifier are MP3 players, DVD players, laptops and palm devices

etc. where you want to amplify the sound to larger audiences.

The feed out socket can be used to connect to amplifiers and mixers.

Using the DVD Player

Safety Precautions

There are dangerous voltages inside this product. To prevent electric shock do not open the cabinet yourself. For service

please contact our regional representative office or direct to us as per the instructions of Limited Warranty

Front Panel

1. Power on-off switch

2. Mode select

7. Play button

8. Back

10. Stop button

16. Eject

20. A-B repeat

21. Pitch control faster/slower

23. Next

Remote Control

1 POWER

16. EJECT

Turns power on/off

Ejects disc

2 MODE

17. DISPLAY

Select play of DVD/USB/SD-card.

Moves to the title/track/chapter

3 SCAN-Not in use

18. SET-UP

(Only for DMB operation: Option)

Sets up various functions

4 ZOOM

19. CH+/CHSelect

Zooms in/out the screen

tracks of CD/USB/SD-card

20 A-B REPEAT

5 ENTER

Selects a menu item

Repeat play of selection

6 GOTO

21 PITCH UP-DOWN or MOVE

Adjust pitch Up/Down or

Jumps to a DVD title/track/chapter

7 PLAY

Move to an item in the menu

Return to normal pitch of Play disc

22 MUTE

8 BACK

Mutes sound

Moves to previous Chapter/Track

23 NEXT

9 PAUSE

Turns to the next capter/tack

Pauses disc play

24 FAST REWIND

10 STOP

Fast rewind disc at 2 ~ 8 times

Stops disc play

25 FAST FORWARD

11 SLOW

Fast forward disc at 2 ~ 8 times

Rewinds disc at 1/2 or 1/4 speed

26 SLOW

Forwards disc at 1/2 ~ 1/4 times

12 TITLE

Displays the track number of disc

27 MENU

13 NUMBER

Display menu of a disc in play

Jumps to a song of a CD or MP3

28 LANGUAGE

14 DVD/AUX MODE CHANGE

Select language (When disc support)

Change mode of DVD/DMB/AUX

29 S-TITLE

15. VOLUME

Select sub-title language (-ditto-)

Increase or decrease volume

30 ANGLE

Shows various angled display(-ditto-)

Play

With your TV remote control, change connected TV to proper video input mode (VIDEO-IN)

Press the remote control of [POWER] or [ ] on the DVD front panel. (Standby to disc open mode)

Load a disc in the disc slot with label side up. Place a single disc in the slot. The disc will be inserted

automatically. Then the DVD player begins to read it so as to identify different disc formats, then display on the screen.

When directory or menu picture displays on the screen, press the direction

buttons [▲][▼][ ][ ] on the remote control to move lighting band to desired track.

You can also directly press number buttons to select a specific track.