ATV MLE800 Посібник користувача - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник користувача для Монітор ATV MLE800. ATV MLE800 20 сторінок. Cctv monitor

Troubleshooting

Symptom

No Video or S-Video mode

Poor colour in Video

Blurred picture in Video

Picture jitter (VGA mode)

No picture (VGA mode)

Power LED not lit (VGA mode) Check main switch is ON. Check if the power cord is

Image is unstable (VGA mode) Check signal cable is connected to video card correctly

Image not centred, too small

or too large (VGA mode)

Picture bounce or wave

pattern (VGA mode)

Picture is blurred (VGA mode)

Check Video cable is connected to the monitor and set

to Video mode

Adjust AUTO COLOR on the OSD menu.

Adjust CLOCK in the OSD menu.

Adjust clock to set the screen position and adjust until no

noise is detected in the OSD Menu.

Check mains switch and the PC power switch are ON

connected

Adjust clock or H&V POSITION

Magnetic interference from electrical devices are too close to

the monitor

Adjust contrast and brightness

Check