ATW MINI 8 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Тепловий насос ATW MINI 8. ATW MINI 8 18 сторінок. Air-to-water heat pump

Dear Customer,

thank you for purchasing the ATW-MINI Heat Pump. We believe you will be satisﬁed with this product

and that this product will bring comfort into your home.

As this product is a complex appliance, pay high attention to this User Guide. This guide will make you

completely familiar with the product application, placing, construction and will provide you with other

necessary information.

IMPORTANT WARNING

Before you connect the heat pump to the network, contact your local distributor for authorization.

Connection, service and inspections of the electrical installation can only be done by an authorized electrical

installation company. The Certiﬁcate of Warranty is not valid without conﬁrmation from such a company.

The MINI Heat Pump is a split system (divided):

Indoor unit MINI IO-15

Outdoor unit AOY(*)14, 18, 30 36, 45, 54, WOYG112, 140, WOYK112, 140, 160

Outdoor temperature sensor, indoor temperature sensor

User Guide

Certiﬁcate of Warranty

The ATW-MINI Heat Pump is designed for heating of family houses or smaller industrial buildings. The product

is to be connected to low-temperature heating systems. This heating system is best suitable for ﬂoor heating,

wall and ceiling heating.

Connection to the classical wall convectors is theoretically possible, but it is limited by the maximum temperature

of the output heating water (50°C, 60°C in High Power systems). At this temperature, the COP (efﬁciency) is lower.

When connecting to the wall convectors, it is necessary to calculate the power at an input water temperature of

45-50°C and to compare it with the thermal loss of the given room.

The heat pump can be used as a source of cooling water.

Basic construction components:

Outdoor Evaporator

This unit is made from a steel plate with high-quality anti-corrosive treatment by electrostatic pulverized

paint. The core of the unit is a two-step DC inverter compressor, which represents an innovation in the ﬁeld of

heat pumps and which guarantees reliability and long lifetime. Other parts include an evaporator with anti-

corrosive treatment and a lifetime of over 30 years, fans with variable rotation speeds, an electronic expansion

valve, controlling and measuring components.

Indoor Unit

The core of the unit is a high-quality refrigerant/water heat exchanger. Other essential part is a high-quality

regulator with sophisticated software which is responsible not only for the operation of the heat pump but

also for the total temperature regulation in the building. The regulator ensures cascade regulation of the heat

pump with backup heater during insufﬁcient power of the heat pump.

It is also possible to connect the appliance to PC through internet interface for comfortable and effective

control of the heat pump.