Auber Instruments WS Series Короткий посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Короткий посібник для Контролер Auber Instruments WS Series. Auber Instruments WS Series 15 сторінок. Programmable pid temperature controller with dual probe
Також для Auber Instruments WS Series: Короткий посібник (14 сторінок), Посібник з експлуатації та інструкція (18 сторінок), Посібник з експлуатації та інструкція (18 сторінок), Короткий посібник (14 сторінок)

Instruments only. Using it to control a not recommended device can be dangerous

and cause fire. Auber Instruments is not liable for damages caused by misuse of

the controller. If you are not sure the controller can be used, please contact Auber

Instruments before use.

• If an abnormal display or noise is observed, turn the controller off, unplug the

power cord and contact the manufacturer before using it again.

• Clean the controller only when it is cool and unplugged.

• Do not allow children to operate the controller.

Operating Instructions

1. Description of the controller.

1) TEMP1, Left window - During normal operation, it displays the temperature values

of probe 1. When high or low limit alarm of probe 1 is on, this window will flashing

between the alarm type (AH1or AL1) and the temperature. In the parameter setting

mode, it displays the controller's system parameters.

2) TEMP2/TIME, Right window - During normal operation, it displays the

temperature value of probe 2 (food internal temperature probe), or the time passed

since the controller was powered up. When high limit alarm of probe 2 is on, this

window will flashing between AH2 and the temperature. In the parameter setting

mode, it displays the value of the parameter.

3) Output status indicator - This LED indicates the output status that should be

synchronized with heater. When it is on (lit), the heater is powered. When it is off,

the heater power is off. When it is flashing, it means the heater is on and off

intermittently to reduce the power output. It should be synchronized with the power

light on the cooking device.

Figure 1. Front Panel