Abstract Data ADE-60 Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Музичне обладнання Abstract Data ADE-60. Abstract Data ADE-60 17 сторінок. 4:4 mix utility
Також для Abstract Data ADE-60: Посібник користувача (11 сторінок)
Друкувати сторінку
3) Rear Connections
POWER CONNECTION:
CH1 USER SETTING JUMPERS: On/Off jumpers for channel 1:
CH2 USER SETTING JUMPERS: On/Off jumpers for channel 2:
CH3 USER SETTING JUMPERS: On/Off jumpers for channel 3:
CH4 USER SETTING JUMPERS: On/Off jumpers for channel 4:
PRECAUTIONS:
© Abstract Data Ltd.
10-16 pin Eurorack power connection
ONLY CONNECT THE POWER CABLE TO THE POWER CONNECTION AS SHOWN!
DO NOT CONNECT THE POWER CABLE TO ANY OTHER PORT!
The ADE-60 uses the Doepfer standard for power connection and cable orientation.
The RED stripe on the supplied power cable connects to the NEGATIVE (-12V) rail
on the ADE-60 with the RED stripe facing DOWN. This is marked on the back of
the ADE-60 PCB as "– RED".
The ADE-60 has diode and polyfuse protection built in but an incorrectly connected
cable may still cause permanent damage to the module or the power supply.
The rear panel of the ADE-60 has exposed parts and connections. Please ensure
when handling the ADE-60 that the unit is held by the sides of the front panel or
the sides of the PCB (Printed Circuit Board).
POWER CABLE
-RED
RED STRIPE
Attenuversion
Attenuversion
Attenuversion
Attenuversion
Page 3 of 15
Gain
Bias
Gain
Bias
Gain
Bias
Gain
Bias
Version 1.1.0