Dam Easy Flood Barriers DME01 Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пристрій захисту Dam Easy Flood Barriers DME01. Dam Easy Flood Barriers DME01 13 сторінок.

Друкувати сторінку

SECTION G: Storing the barrier

STORING THE BARRIER

The barrier and all other parts of the kit must be dry and the side panels fully retracted before storing

in the original packaging.

CAUTION: Take care when lifting, help may be required

1. Open the zip on the bag

2. At the lifting handles marked,

completely and place the

carefully lift the barrier into the

long Storage Protector at

bag on top of the Corner Protectors

the base of the bag

NO TOOLS

NO FIXINGS

NO SILICONE

4. Place Filler, Replacement Seal and

2.0

1.0

3.0

1.0

3.0

1.0

3.0

1.0

3.0

4.0

Instruction Manual into the bag

TOP TIP:

Retain the corner protectors for future use to safely store the barrier in the reusable bag

780mm –1100mm

3. Place 2 Corner Protectors

on the top corners of the

barrier and zip the bag

around the barrier

Instruction

Manual

Valid until:

EVH022/AWI/O2/04-16

Certificate no.:

04-2019

NO DRILLING

5. Store upright on a smooth

surface, in a cool place

out of direct sunlight and

extremes of temperature

Problem

Possible Cause(s)

Barrier is not

1. Reveal width is

>1100mm

secure at maximum

extension

2. Reveals are not

smooth/solid/parallel

Interferance from

1. Reveal depth is

door closing

<75mm / 3in

2. Barrier is positioned

too close to the closed

door

3. Protruding door

furniture is causing

interferance

The barrier is not

Barrier rises when

sufficiently secured in

seal is inflated

the doorway

Seal does not inflate

1. The connection to the

OR the air pressure

pump mechanism is

is not maintained

loose & leaking air

at 2bar

2. The seal is punctured

Cannot replace the

The direction switch is

ratchet handle into

toggled in the wrong

direction to allow the

the starting position

handle to move in the

desired direction

Cannot move the

Position of the handle is

direction switch on

preventing the toggle on

the ratchet handle

the direction switch

Pump handle is stiff

Needs lubrication

For further information and demonstrations, please visit:

www.dameasyfloodbarriers.com

SECTION H: Troubleshooting

Solution

1. The doorway is not suitable for a single

barrier flood protection. Consider purchasing

an extension system

2. Repair imperfections on the surface of the

reveals

1. The reveals are not suitable for a Dam Easy

flood barrier protection.

2. Reposition the barrier within the reveals

further from the door, and repeat barrier

installation

3. Reposition the barrier within the reveals

further from the door or remove the door

furniture and repeat barrier installation

Deflate the seal and repeat the installation,

pressing down on the lifting handles while

extending the side panels

1. Release the seal from the quick release

valve within the Seal Replacement Panel

and reconnect with care

2. If there is no flood water in contact with

the barrier, remove the barrier and replace

the seal. If flood water is present, do not

remove the barrier

Manipulate the direction switch and ratchet

handle simulataneously

Jack the ratchet handle and simultaneously

manipulate the direction switch

Apply general use lubricant