Conair CTX184CPC Важливі інструкції з техніки безпеки - Сторінка 5
Переглянути онлайн або завантажити pdf Важливі інструкції з техніки безпеки для Електробритва Conair CTX184CPC. Conair CTX184CPC 8 сторінок. 14 pieces grooming system multi-use
Друкувати сторінкуpointed downward. Spread one drop of oil across
the blades, then turn the trimmer off and wipe
away the excess oil with a soft cloth.
Be careful not to use too much oil and don't oil
your trimmer more than necessary, as this could
damage the motor. (Never attempt to oil the
motor bearing, as it is permanently lubricated.)
After oiling the blades, return the trimmer and
oil packet to the trimmer storage base. Keep oil
away from children.
blade care
Because the trimmer blades are precision-
made for a very special use, they should always
be handled with care. Each time you finish
using the trimmer, take the cleaning brush pro-
vided and brush away any loose hair that has
collected in the blades. Then store the trimmer
in its recharging storage base to protect the
blades until the next use.
Be especially careful when changing or
adjusting blades. When you have your trimmer
serviced, be sure that both blades are sharpened
or replaced at the same time.
To promote the long life of the appliance, use
your trimmer only for the purpose intended
by the manufacturer – to trim your beard and
mustache.
turbo feature
This product is equipped with a turbo boost button.
When activated, this will provide 15% more cutting
power. This is especially useful for cutting through
thicker hair.
To activate the turbo feature:
1. Press down the lock button and turn the Power
switch to the "on" position.
2. Press the Turbo button.
3. Continue to press the Turbo button for as long as
you need the extra power.
4. Release the Turbo button to return to normal
power
three poSItIon taper control
The Conair trimmer taper control switch is posi-
tioned at the back of the
unit. You can hold the trim-
mer in your hand and adjust
the switch as needed. The
taper control eliminates the
need in some situations for an
attachment comb because it
lets you gradually adjust the
closeness of the cut. For closest cut and shortest hair,
push switch all the way to level #3. This is the setting
to use for the 2 day shave look. To increase the cutting
length, slowly push control down to level #2 or #1 for
longer cut. Note that too much clipped hair on the clip-
per can slow down its operation. To remove it without
removing the blades simply use the enclosed cleaning
brush and gently sweep away the clipped hair from
cutting surfaces.
growIng a beard and muStache
There are three key factors that will determine which
beard or mustache style is best for you:
1. The shape and dimensions of your face.
2. The natural growth of your beard/ mustache.
3. The thickness of your beard/mustache. If you are
unsure about the type of beard or mustache that
would most suit your face, speak with a profes-
sional hair stylist and ask for an opinion on what
style would be best. Once your beard or mustache
has been styled, it is essential that you maintain
its appearance. To do this, use your trimmer to
trim your beard/mustache weekly.
For the best trimming results, your beard should
be slightly damp (NOT WET) when using your trim-
mer. This will prevent the trimmer from removing
more hair than desired.