Dametric TVD-M2 Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Dametric TVD-M2. Dametric TVD-M2 8 сторінок. Touchpoint vibration monitor
Друкувати сторінку
Dametric
1.
TECHNICAL SPECIFICATION
Article number:
TVD-M2
TVD-M3
Power supply:
TVD -M2
TVD -M3
Power consumption:
Temperature limit:
Enclosure:
Size
Sealing:
Mounting:
Weight:
Transducer:
Amplifier:
Sensitivity
Highpass filter:
Lowpass filter:
Front display:
Location attenuator:
Production attenuator
Level:
Freq. response:
Control input:
Signal output:
Headset output:
Alarm limit 1,2:
Alarm output 1,2:
Connection:
CE approval:
TVD-M2-M3 EN.docx
Dametric
Valmet
TVD-M2
VAL0123130
TVD-M3
VAL0308989
115 to 230 VAC, +5%/-10%, 48-62 Hz
24 VDC, ±10%
Max 20VA
0 to +70 °C
Polycarbonate box, aluminum front,
Width = 150, height = 75, depth = 110 mm
IP20
DIN-rail or two 4-mm screws
0.9 kg
VIM-T2, TVD-T1, TVD-T2 or TVD-T2S.
Voltage input
100mVrms = 100%
200Hz
Selectable, 10kHz or 40kHz (depending on transducer)
Led bar graph, scaled 0 - 100%, 5 % per led
Led, yellow indicating active alarm limit outputs
Led, green, indicating active production input
Led, green, indicating power on
Adjustable in 16 steps between 100 and 21 % of normal gain
Adjustable to 0-50% of normal gain by use of a single turn potentiometer
See 4.4
A closed input initiates the production attenuator. The input must be
galvanically isolated.
Galvanically isolated analogue current signal, 4-20 mA, low pass filtered to
1Hz, max 800Ω load
Audio signal for headset, 3.5mm phono contact
Adjustable, 0 to 100 %, single turn potentiometers
1-pole toggling relay contact, max. 230Vac, 1A, 200W
Detachable screw connectors
EN50081-2:1993, EN50082-2:1995, 89/336/EEC.
May 26, 2011 / BL
TVD-M2 / TVD-M3
SKC
SKC9826773
--
2(8)