ABSTRACTA Agile Інструкція з використання - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з використання для Внутрішнє оздоблення приміщень ABSTRACTA Agile. ABSTRACTA Agile 9 сторінок.
Друкувати сторінку
A
Abstracta Agile Monitor Bracket
Bruksanvisning / User Instructions ver 1.0
Including components
Monitor Bracket (2 pcs)
1
Wall Bracket (2 pcs)
2
Screw M6 (4 pcs)
3
4
Screw (8 pcs)
Washer (4 pcs)
5
(Abstracta Agile with
brackets and monitor/TV
mounted)
Abstracta technical support,
tel.+46472269600.
1. Mount the Monitor Brackets.
(Positions in next step)
3
5
1
Your Monitor/TV
3. Decide your gap "Z" (between
your monitor/TV top and inside of
the top frame of Abstracta Agile).
Z
= Your wanted gap! (Min. 12 mm)
Monitor/TV top
Inside of frame
2. Measure and note "X" and "Y" for your monitor/TV.
X
= your measured distance!
Mount centered or more to the left side!
1
Y
= 200, 300, 400 mm.....?
4. Calculate "H1" and mark out this with a straight, perpendicular line. Place
the top Monitor Bracket to your line, like the picture shows (don´t screw).
Mark out four of the bracket holes to the mounting board with a pencil.
Calculate "H2" and mark out in the same way for the bottom bracket. Use a
sharp tipped tool to punch deeper center marks for easier screwing!
Align
edges!
Mark center of holes here!
Draw the
(56 mm)
lines here!
Backside of your monitor/TV
Mount centered or more
to the right side!
H1
= X + Z + 56 mm
Align edges!
H2
= H1 + Y
Page 1 of 3