Conair GS15RC Інструкція - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція для Кухонна техніка Conair GS15RC. Conair GS15RC 4 сторінки. Handheld fabric steamer

OPERATING

INSTRUCTIONS

1. Plug the unit into the electrical outlet.

2. Release lever will light up. Allow one or two

minutes for the unit to warm up. The appliance

is ready to use when release lever light is off.

3. Holding the steam jets away from you and

anyone else in the room, engage the trig-

ger. Steam should now be released from the

steam jets.

4. When first using the device, test on an old

cloth, as there may be sediment left from the

manufacturing process or transportation.

5. To stop the flow of steam, release the trigger.

6. Unplug the device when it is not in use.

1. To prepare your fabric for steaming, brush

it with the fabric/lint brush attachment. This

will loosen the fibers and allow better steam

penetration.

2. Hang your garment or fabric.

3. Pass the steam jets just above the fabric

where the wrinkles are. It may take a few

passes to remove the wrinkles completely.

4. After use, unplug steamer and empty any

remaining water from the tank to avoid leakage.

ADDITIONAL

INFORMATION

FOR DUAL-VOLTAGE

PRODUCTS

For use in the U.S.A., the voltage selector

switch should be placed in the 120 position.

For use in several countries overseas, the

voltage selector may need to be placed in the

240 position. Confirm the voltage available

at each overseas location before using the

appliance. For connection to a 240 volt supply,

use an attachment plug adapter of the proper

configuration for the power supply receptacle.

For 120 Volt Operation

Flick the dual voltage switch to the 120

position.

For 240 Volt Operation

Flick the dual voltage switch to the 240

position. A plug adapter may be necessary

in certain countries..