Conairphone SW6404 Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Телефон Conairphone SW6404. Conairphone SW6404 7 сторінок. 13 memory speaker telephone
Друкувати сторінкуGET TO KNOW YOUR
TM
CONAIRPHONE
TELEPHONE
Diagram A
1. Receiver
2. Transmitter
3. Fully Modular Heavy
Duty Handset Cord
4. Store Key
5. Flash Key
6. Redial Key
7. Dial Tone Reset Key
(Hook Switch)
8. Memory Storage Priority Buttons
9. Receiver Norm/High
10. Ringer Off/Low/High
11. Memory Index Label
4
12. Electronic Ringer
13. Off Hook Handset Rest
14. Memory Key
15. 10 Memory Storage Button for
Frequently Called Numbers
16. Speakerphone Activator Key
(with LED indication)
17. Volume Control (for Speakerphone use)
18. Data Port
19. Tone or Pulse Switch
20. Microphone
21. Speaker
5
Preparation
TM
First carefully remove your CONAIRPHONE
telephone from the unit carton. In addition to
the handset and telephone base, each carton
contains the following accessories:
• Owner's Manual
• One 7 ft. fully modular coil cord
Important Notice
TM
Your CONAIRPHONE
telephone will operate
on all systems, true tone or rotary.
1. If your home is wired for rotary service,
move switch to pulse position (P).
2. If your home is wired for tone service,
move switch to tone position (T).
3. If you're unsure of the type of service you
have, ask your local telephone company.
INSTALLATION
Coil Cord Connection
Insert coil cord into modular jack located on
side of housing. Connect the other end into
the modular jack located on the handset.
Line Cord Connection
With a modular telephone system, insert the
other end of cord into a modular wall jack.
Make sure all plugs snap firmly in place
(see Diagram B).
Diagram B
6
With a four prong style jack, simply use a plug
in a modular adaptor (see Diagram C).
Diagram C
Wall Mounting
Your CONAIRPHONE
TM
telephone is also
designed to mount on a wall surface over a
modular wall jack. Wrap the excess cord
under the base. Insert the other modular plug
into the wall jack, making sure it snaps firmly
in place. Position the wall mount slots on the
bottom of the base over the two studs of the
wall plate. Pull down to lock in place
(see Diagram D).
Diagram D
NOTE: There is a provision for holding the
handset off hook when the telephone is wall
mounted. Position the handset on the notch
above the dial tone reset key. This is a
convenient feature when you need to call
another person to the phone or if you are
interrupted during the conversation
(see Point 13 of Diagram A).
7