Dan D'Agostino MOMENTUM MxV Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Dan D'Agostino MOMENTUM MxV. Dan D'Agostino MOMENTUM MxV 11 сторінок.
Друкувати сторінкуLEGAL NOTIFICATIONS
Dan D'Agostino Master Audio Systems is a registered trademark of Dan D'Agostino Master Audio
Systems LLC (DDMAS). The information in this owner's manual is subject to change without
notice. Current Version 1.0 of this manual was produced by the DDMAS engineering, sales and
marketing departments.
The information in this manual is the sole property of DDMAS. Any reproduction in whole or
part without the expressed written permission of DDMAS is prohibited. No material herein may
be transmitted in any way including either electronic or mechanical methods for any purpose
without expressed written permission of DDMAS.
CAUTION:
NO USER SERVICEABLE PARTS INSIDE. Do not open the amplifier's chassis or remove
any of its screws. Contact DDMAS or your dealer if you have service needs.
WARNING:
Do not expose this amplifier to moisture or excessive humidity, and do not use it
outdoors. Fire hazard may result.
The lightning flash with arrowhead, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating maintenance (servicing) instructions in the
literature accompanying the appliance.
PACKAGE CONTENTS
If any of the following items are missing, please contact your dealer:
✔ 1 Momentum MxV Integrated Amplifier
encased in protective packaging
✔ 1 remote control
✔ 2 AAA batteries
✔ 1 Philips head screwdriver
✔ 1 Bluetooth antenna
2
✔ 1 Wi-Fi antenna (if optional digital
module is installed)
✔ 1 owner's manual
✔ 1 AC power cord
✔ 1 pair of white lifting gloves
UNPACKING AND INSTALLATION
Unpacking the Momentum MxV Integrated Amplifier from its case
While the Momentum MxV Integrated Amplifier is still in its case, please move it to a location
near the place where it will be installed. Remove all jewelry including watches, rings and belts
from your person to avoid damage to the exterior of the integrated amplifier during the removal
and installation.
The finish of the Momentum MxV Integrated Amplifier is durable but can be damaged. To protect
its pristine surface, we strongly suggest wearing the supplied white lifting gloves when handling
to avoid abrasion, fingerprints caused by oils from skin, etc. See Operation: Maintenance for
instructions on cleaning.
Installation requirements
This component's dense metal chassis makes it much heavier than most other integrated
amplifiers, so make sure the surface that will support this component can safely hold its weight.
Adequate ventilation must be provided for the amplifier. There should be at least 3 inches of
clearance on each side and 3 inches of clearance at the top. The bottom vents must not be
obstructed by thick carpet, dust, etc. We recommend that the integrated amplifier be installed
in an open equipment rack to assure proper ventilation. The amplifier may be installed in a closed
cabinet or in an equipment closet, but the space must be designed with substantial ventilation at
top and bottom; active ventilation (i.e., powered fans) is preferred.
Important: Instead of using a traditional cable, the
Momentum MxV Integrated Amplifier uses a specially made
connector located near the right front edge that joins the
audio chassis (top) and the power supply chassis (bottom). To
assemble the amplifier, place the power supply chassis in the
Momentum MxV Integrated Amplifier's final location. Carefully
place the larger audio chassis on top of the power supply
chassis. Ensure the bottom-plate connector makes solid
contact with the audio chassis top-plate connector.
If plugging the Momentum MxV Integrated Amplifier into a
power strip or power conditioner, make sure it is a high-quality unit that does not alter ground
connections or insert current-limiting elements in series with the AC mains signal.
If you need to return the Momentum MxV Integrated Amplifier for service
If you should need to return the for unit service, be sure to use the original box and materials
for shipment. Before you ship the unit, unplug it from the wall and let it cool down for 2 hours.
To protect the finish during shipping, rewrap the amplifier in the protective packaging in which it
was originally shipped. Make sure the amplifier is completely cool. Wrapping the amplifier when it
is warm will cause the plastic to leech into the amplifier's surface and will permanently damage
the finish.
3