DAN DRYER Bjork 3222 Інструкція з монтажу та посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з монтажу та посібник користувача для Дитячі аксесуари DAN DRYER Bjork 3222. DAN DRYER Bjork 3222 12 сторінок. Baby changing station (with safety strap)
Друкувати сторінку
Reference
Version
27-10-2020
Mounting on wall (contd.)
Mounting:
1. Holes for mounting the wall bracket should be
marked up and drilled using the drill template
enclosed.
2. Insert wall plugs into the holes.
3. Do not tighten the screws in the four upper plugs
too much. Leave 5 mm space from wall surface.
4. Secure the table on to the wall using the keyholes
(A) at the top of the wall bracket.
(A)
(B)
5. Fold the table down carefully, and insert the
remaining screws (B) at the bottom of the
wall bracket.
6. Fasten all screws (A) and (B) tightly to
ensure the wall bracket is securely fixed to
the wall.
7. Fit the front cover (D) and fasten it using
the 4 M4 x 10 screws supplied (C)
8. Check the table can fold up and remain in
the upright position.
9. Finish off by veryfying the wall bracket is
securely fixed to the wall.
DAN DRYER A/S • Alsikevej 8 • DK-8920 Randers NV • www.dandryer.com • [email protected]
Document
Björk Baby Changing Station
User Manual
(A)
(B)
Lang.
Page
EN-US
4 of 12
(C)
(C)
(C)
(D)
(C)