DAN DRYER 3050 Посібник з технічного та сервісного обслуговування - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з технічного та сервісного обслуговування для Диспенсер DAN DRYER 3050. DAN DRYER 3050 12 сторінок. Touch-free dispenser, liquid soap / disinfectant
Друкувати сторінку
Version
16.06.2021
3050-3056 BJÖRK touch-free dispenser, soap / disinfectant
Installation and connection (continued):
7. Mount the liquid
container by
gently pushing it
into the groove
on the pump
housing.
8. Pull the silicone tube downwards and place the
outlet nozzle in the slot. Make sure that the collar
is located under the pump housing.
If the outlet nozzle
is placed or instal-
led incorrectly, the
pump will not func-
tion or its function
will be decreased.
Make sure that the
collar is located under
the pump housing.
DAN DRYER A/S • Alsikevej 8 • DK-8920 Randers NV • +45 86 41 57 11 • www.dandryer.com • [email protected]
Document
Maintenance and service manual
9. Close the fl ap on the front of the pump
housing by turning clockwise and lifting it
approximately 1 cm so the two pins fall into
the guide holes.
10. Remove the
protective
plastic plug.
11. Open the door to the battery box.
(If you have chosen to use external power
supply, skip to page 6).
Lang.
Page
ENG
4
of 12