ADDER AdderLink X-DVI Посібник - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник для Подовжувач ADDER AdderLink X-DVI. ADDER AdderLink X-DVI 15 сторінок. Digital video and usb extenders
Друкувати сторінкуConnections at the local module
Video connection
1 Use the supplied DVI/D link cable to connect the DVI input socket of the
local module to the digital video output socket of the computer.
DVI/D connector of
the video link cable
USB connection
1 Use the supplied USB cable to link the USB socket of the local module to a
vacant USB socket on the computer.
Type-B connector of
the USB link cable
Link connection
1 Attach one of the supplied ferrite cores to the link cable, next to the
connector. This is necessary to ensure compliance with the European EMC
directive and FCC regulations.
2 Connect the link cable (see page 2 for cable advice) to the local module
socket labelled
.
TO REMOTE
RJ-45 connector of
the CATx link cable
Supplied ferrite core
See the
Power connection
The local module is designed to derive its power from the host computer via
the USB connection. If this is not possible, then use an optional Adder power
adapter.
1 Connect the output lead of the optional power adapter to the socket
labelled '
' on the local module.
POWER
2 Insert the IEC connector of the
separate power lead into the
corresponding socket of the
power adapter. Connect the
other end of the power
lead to a nearby mains
socket.
Note: After all connections are
made, power up the monitor
and remote module before,
followed the local module,
and then switch on the
computer.
INSTALLATION ADVICE
on page 4
Output lead from
the power adapter