3onedata IES2010-2GS Series Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Мережевий маршрутизатор 3onedata IES2010-2GS Series. 3onedata IES2010-2GS Series 4 сторінки. Industrial ethernet switch
Друкувати сторінку
The switch support redundant DC power input, which provides
two terminal blocks for PWR1 and PWR2 input. Voltage input
range is 12 ～ 48VDC. The redundant power can be used
independently. PWR1 and PWR2 can supply power at the same
time, once either of these two powers fails, another power can
acts as backup automatically to ensure reliability of the network.
It also supports reverse polarity connection.
【Dimension】
The series of products are the same size, and the number of the
Ethernet interface is different. Unit (mm)
【Communication connector】
10/100BaseT(X) Ethernet port
The pinout define of RJ45 port display as below, connect by UTP
or STP. The connect distance is no more than 100m. 100Mbps is
used 120Ω of UTP 5, 10Mbps is used 120Ω of UTP 3, 4, 5.
RJ 45 port support automatic MDI/MDI-X operation. Can connect
the PC, Server, Converter and HUB .Pin 1,2,3,6 Corresponding
connections in MDI. 1→3, 2→6, 3→1, 6→2 are used as cross
wiring
in
the
MDI-X
port
of
10Base-T/100Base-TX are used in MDI/MDI-X, the define of Pin
in the table as below.
NO.
MDI signal
1
TX+
1
8
2
TX-
3
RX+
6
RX-
4, 5, 7, 8
—
Note： , "TX±"transmit data±, "RX±"receive data±, "—"not use.
10/100Base-T(X) MDI (straight-through cable)
10/100Base-T(X) MDI-X (Cross over cable)
MDI/MDI-X auto connection makes switch easy to use for
customers without considering the type of network cable.
1000Base SFP fiber port(mini-GBIC)
1000Base-FX SFP fiber port adopts gigabit mini-GBIC
transmission, can choice different SFP module according to
different transfer distance. Fiber interface must use for pair, TX
port is transmit side, must connect to RX (receive side). The fiber
interface support loss line indicator.
- 2 -
Suppose: If you make your own cable, we suggest labeling the
two sides of the same line with the same letter (A-to-A and
Converter
and
HUB.
B-to-B, shown as below, or A1-to-A2 and B1-to-B2).
MDI-X signal
RX+
【LED Indicator】
RX-
LED indictor light on the front panel of product, the function of
TX+
each LED is described in the table as below.
TX-
—
LED
PWR
Link/ACT
RJ45 port with two LED lights
10/100M
(Green)
Link/ACT
(Green)
【Installation】
Before installation, confirm that the work environment meet the
installation require, including the power needs and abundant
space. Whether it is close to the connection equipment and other
LED system statue
Statue
Description
ON
PWR connect and running normal
Power supply have no connection
OFF
or unwonted
ON
Port made effective connection
Blinking
Port is in active statue
Port
did
not
make
effective
OFF
connection
ON
100M mode（100Base-TX）
OFF
10M mode（10Base-TX）
The port has been the establishment
ON
of an effective network connection
The port is in a running state of
Blinking
network
The port is not the establishment of
OFF
an effective network connection