Elite Pull-Out Pantry 450MM Інструкція з монтажу Посібник з монтажу - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Внутрішнє оздоблення приміщень Elite Pull-Out Pantry 450MM. Elite Pull-Out Pantry 450MM 8 сторінок. Width cupboards

Друкувати сторінку

Pull-Out Pantry

Installation Instructions

for 400MM and 450mm width cupboards

Step Five – Door Alignment and Stabilisation

  Horizontal Door Adjustment: Loosen (but do not remove) the middle

Hex Bolt on Top and Bottom T-Bars (A) (see Step 4). Then use the left

and right Hex Bolts (B) to position the Door horizontally. When the

horizontal position is correct, tighten the middle Hex Bolts to fasten the

Door to the Frame

  Vertical Door Adjustment: Loosen (but do not remove) the Riser Anchor

Nuts (C) (see Step 3) on the Base Runner. Then use the M8*20

Adjustment Bolts (D) (see Step 3) to position the Door vertically. When

the vertical position is correct, tighten Riser Anchor Nuts (C).

  Affix Saddle Backed Stabilisers: (Note: You may wish to do this after

Step 6 so the position of the Stabilisers does not interfere with the pantry

baskets.) Affix the two Saddle Backed Stabilisers (E) over the Frame

front vertical bar to the Door to stabilise the Door using 4 x ST$*14

Countersunk Head Screws for each Stabiliser

Horizontal Door Adjustment

Vertical Door Adjustment

Affix Stabilisers