Elite Acoustics A1-58 Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Підсилювач Elite Acoustics A1-58. Elite Acoustics A1-58 12 сторінок. 120w lithium battery powered acoustic amplfier with 3 channels, mixer, and 16 digital effects
Друкувати сторінку
1.
Battery Switch [26] is set to Connect. (Battery Switch to preserve battery life.)
2.
Make sure the SPEAKER VOLUME [3] control is down before you turn the POWER [25]
on.
3.
Connect the input of your microphone to the MIC IN [15.1]. Or you can connect a ¼" line
input [15]from an instrument [15.2]. You can also connect an additional mono or stereo
[20].
4.
Turn on the POWER [25] switch.
5.
Turn on your source signal(s) and adjust the volume on the source signal for normal
operation.
6.
Turn up LEVEL [16] until there is a solid green light showing "signal"[5] at desired level,
without a red "peak"[5] light, indicating too much signal.
7.
Adjust the SPEAKER VOLUME [3] to a comfortable level.
Power LED: BLUE [1]: Indicate unit is ON
+48V LED [2]: Indicates Phantom Power is on
Monitor Output Controls
Speaker Volume [3]: Control speakers' volume level
Mono [4]: Changes speaker output to Mono sound
Equalizer [6]: Adjust Speaker High, Mid, and Low Frequency response
Peak LED [5]: RED indicate Signal Clip
Signal LED [5]: GREEN indicate Signal
Aux Input/Level [7]: Connect audio source with 1/8" jack from MP3/CD player
Effects Controls
Effects Mix [8]: Amount of effect being applied to Input
Rate/Decay [9]: Controls the duration of the effect
Effects Knob Selector [10]: Select effect of choice
EFX Bypass [11]: Turn effects on or off (When LED is on, the effects are turned off)
Channel 1
EFX Send Level [13]: How much output effect is being sent out
+48V [14]: Phantom Power control
Line In [15]: 1/4" TRS inputs
Level [16]: Gain level control
Mute [17]: Mute channel
Mic In [15.1]: XLR for Microphone Input
Instrument Input [15.2]
Channel 2/3
Level [19]: Gain level control
Left/Right Input [20]: 1/4" TRS Input
EFX Send Level [21]: How much output effect is being sent out
Monitor Output: Connect with extra speakers/monitors
Output Source [22]: Assigns Main Output or Direct Output
Main Output [23]: XLR Output