Elite Acoustics Engineering A6-55 Посібник із швидкого старту - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Підсилювач Elite Acoustics Engineering A6-55. Elite Acoustics Engineering A6-55 13 сторінок. Acoustic guitar and vocal amplifier with 6 channels, mixer, effects, lithium battery and bluetooth
Друкувати сторінку
CONNECTING TO ANOTHER ACTIVE SPEAKER FROM MONI-
TOR OUTPUT OR (HOUSE PA) FROM DIRECT OUTPUTS/MAIN
The Monitor Output can be use to connect to other pair of Active Speaker for larger venues. 1/4"
TRS jacks are recommended. Monitor Level Volume Control will set the Monitor Output level.
The XLR output jacks can be used for MAIN MIX outputs (seperate from the Monitor Speaker Out-
put) or Direct Outputs for Chan 1 "Left" (35) and Chan 2 "Right" (35) with Level Control. Switch
(34) control Main (Switch Out) or Direct Out (Switch pressed in).
Battery Switch[37] : Built in Slide Swtich to preserve battery life.
Connect: Enable battery power when using unit
Disconnect: Disable battery power when storing unit to preserve battery life
Battery Meter - Level 1, 2, 3, Low (RED). BLUE charge LED.
use Approved EAE power adaptors ONLY.
Monitor Output: Connect with extra
speakers/monitors
Monitor Output [33]: Connect to
another active speakers using 1/4"
TRS cable.
Foot Switch[36] : Connect up to 3
Foot Switches Footswith #1 is for EFX
bypass. #2 is for Mute Chan #1 and
#3 is for Mute Chan #2. "FootSwitch
controller is optional and not included."
Output Source [34]:Assigns Main
Output or Channel 1/2 Direct Output
Main Output [35]: XLR Left/Right
Output
Main Output Level control
MIX OUTPUTS