AnyCall AY-CPAL45PLUS-C4 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач AnyCall AY-CPAL45PLUS-C4. AnyCall AY-CPAL45PLUS-C4 14 сторінок.

Features

The outside antenna receives a signal from the cell tower and passes them to the booster,

which ampliﬁes the signal and transmits it to your cell phone via the internal antenna. The

inside antenna receives the outgoing signal from your cell phone and passes it to the

booster, which ampliﬁes the signal and sends it to the outside antenna.

Install the outside antenna:

The outside antenna comes with a strong magnet, simply put it on the roof of your vehicle.

Run the cable of the outside antenna from the nearest door to the booster and connect

the connectors by hand, please do not use any tools, otherwise it will be over installed to

break the connectors.

Note: Place the antenna at least 6 inches away from any windows including sunroofs,

and 12 inches away from any antennas on the vehicle.

Install the Inside Antenna:

The inside patch antenna should be stuck on the back of the front seat and face the space

you need to use your phone.

Note: Please don' t mount it on any metal surface. The vertical installation is better than the

horizontal way. The inside antenna and outside antenna should be at least 6ft (2m) apart, if

possible.

Connect the Power Cord:

Connect the DC power cord into the vehicle's DC power source, verify that all of the

connections to the booster are tight and secure, plugging the power cord to the booster, the

green LED light will glow, indicating that the booster is ready to use.

Note: You may purchase an optional AC power supply if you want to use the booster as an

indoor desktop system.

WARNING: The booster is rated for DC6V input voltage. DO NOT use the booster with a

high-voltage power supply. This could damage the booster or cause personal injury.

Mounting the booster (optional):

Select a location to install the booster that is away from excessive heat, direct sunlight or

moisture and that has proper ventilation.

Recommended installation locations are:

Under the seat

Under the dash

Troubleshooting

1.During using your ampliﬁer, if the ampliﬁer interferes with your radio or other electronic

device, move the ampliﬁer further away from those devices, you might be able to solve it

yourself.

2.Usually, if the LED lights is Green, the booster works normally. If the lights are red,

self-oscillates happen. You should un-plug the power supply, and increase the distance

(horizontally or vertically) between the Outside Antenna and Inside Antenna, then re-plug

the power supply to see if the lights turn green.

PERFORMANCE GUARANTEED: 30-day money-back guarantee, 90-day

free replacement, 5 -year manufacturer warranty.