AnyCubic Kossel Plus Модифікація - Сторінка 2
Переглянути онлайн або завантажити pdf Модифікація для 3D-принтери AnyCubic Kossel Plus. AnyCubic Kossel Plus 3 сторінки.
Друкувати сторінкуAssemble the linear rails (D06) as the following figures show.
2. Firmware
Change the parameters in firmware as the following figure shows or download the
latest firmware from Google Drive
(https://drive.google.com/open?id=0B8VIB533cgdMSVMxNm43aG1OQ0U).
DELTA_DIAGONAL_ROD
19 in the manual);
DELTA_SMOOTH_ROD_OFFSET
DELTA_PRINTABLE_RADIUS
For the limit switches have been moved down, the height need to be adjusted
(Page 18), and you also need level the platform.
Less
than
67mm
change 267 to 271.5 or the number you debug (Page
change 188 to 187 or the number you debug;
change 115 to 116；
Less
than
15mm