AnyFit PS03 Посібник - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник для Фітнес-обладнання AnyFit PS03. AnyFit PS03 12 сторінок. Bicep curl / tricep extension

Step 4

1. Attach 1×Side Cover (Right Front) (#37), 1×Side Cover (Left Front)(#36),

1×Side Cover (Right Rear)(#35), 1×Side Cover (Left Rear)(#34),

1×Bottom Shield(#40) to Weight Frame Assembly(#1), using:

4×Button Head Cap Bolt M8X16(#47)

4×Flat Washerφ8.5Xφ16X1.5(#62)

20×Button Head Cap Bolt M6X20(#46)

20×Flat Washerφ6.5Xφ12X1.2(#61)

2. Attach 2×Storage Box(#41) to Right Front Shield Frame(#9) and Left Front Shield

Frame(#8), using:

8×Cross Recessed Round Head Screw M4×10(#43)

8×Flat Washer Φ4.3×Φ12×1(#42)

3. Attach 1×Right Front Shield Frame(#9), 1×Left Front Shield Frame(#8),

1×Back Shield(#39) to Weight Frame Assembly(#1), using:

8×Button Head Cap Bolt M5X10(#45)

4. Attach 2×Top Shield(#38) to Weight Frame Assembly(#1), using:

10×Button Head Cap Bolt M6X20(#46)

5. Attach 1×Seat Pad(#33) to Seat Pad Fixing Rack Frame(#15), using:

3×Button Head Cap Bolt M10X30(#52)

6. Attach 2×Arm Pad Fixing Plate(1108)(#23) to Main Frame Assembly(#2), using:

4×Hex Head Bolt M12X30(#56)

4×Nut M12(#68)

7. Attach 1×Arm Pad 500(#32) to Arm Pad Fixing Plate(1108)(#23), using:

4×Button Head Cap Bolt M10X30(#52)

Notice:

1. Fasten Bolt According to Assembly Requirement

2. Back Shield shall align the height with the Weight Frame fixator, put one side into

the Aluminum Strip, then assembly the other side.

8×Flat Washer φ5.5Xφ15X1(#60)

3×Flat Washer Φ11XΦ20X2(#63)

8×Flat Washer φ13Xφ24X2(#64)

4×Flat Washerφ11Xφ20X2(#63)