Anyload T15E v2 series Посібник оператора - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник оператора для Ваги Anyload T15E v2 series. Anyload T15E v2 series 12 сторінок. Pallet jack scale
Друкувати сторінку
4.7 Operating the Scale
Battery
Plug in the
Charging
specified
external
power supply
to a 100-
240VAC
source
Turn On/Off
Hold and
press
Zero Setting
Press
Tare Setting
Press
Removing
Press
Tare Weight
Unit Setting
Press
Press
Print Setting
Press
Counting
Press
Mode
Press
Press
6 |
ANYLOAD NPS Series Pallet Jack Scale Operator's Guide (V1906) – T15E v2 series indicator
OPERATION
DISPLAY
[CHArGE]
[- - - - -]
[Pbt XX]
[-End-]
[-t15E-]
[Ver2.04]
[19-06-10]
[09.38]
[Pbt 85]
[8. 8. 8]
[ 0.0]
[ xx.x]
[ 0.0]
[shows
positive
value]
[ 0.0]
[shows
negative
value]
[ xx.x]
[ yy.y]
[ xx.x]
[ PCS 10]
DETAILS
- charging
- charging on progress
- displays charge capacity
- charging ended
-Indicator model
-Software version
-Current date set (yy-mm-dd)
-Current time set (HH.MM)
-Battery remaining charge (85%)
-Self test
-Weighing state
-Weight shall be within 10% of FS
and must be at stable state
-The Zero indicator will light on
-The weight should be more than 0
and not more than the scale's
capacity, and at stable state
-The Tare indicator will light on,
showing the net weight value
-When tare weight is stored,
pressing the Tare key will remove
the stored tare. The Tare indicator
will light off.
-The lb unit indicator will light on if
it is selected
-The kg unit indicator will light on if
it is selected
-Weight should be greater than
the minimum weighing value and
is at stable
-Counting mode.
-Press the Tare key to browse the
number of samples: 10, 20, 50,
100
-Place the samples, wait to
stabilize then press the Print key to