Duco DucoBox Silent 325 Посібник з монтажу - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник з монтажу для Вентилятор Duco DucoBox Silent 325. Duco DucoBox Silent 325 16 сторінок.
Також для Duco DucoBox Silent 325: Посібник із швидкого старту (16 сторінок), Посібник з монтажу (12 сторінок), Посібник з монтажу (16 сторінок)

06.C LED indications

YELLOW (clignotement rapide)

Transitional phase (please wait)

The system is not working correctly because the DucoBox has not been calibrated� Restart the

06.D Setting type of home

Setting the type of home and number of occupants correctly will provide the ventilation system with a better basis to adjust the

mid-position� There are two types of home: low-rise (e�g� a house) and high-rise (e�g� a flat)� Configuration of this component is

obligatory in the Netherlands. The standard setting for a DucoBox is as a low-rise home for 4 (or more) occupants�

Setting type of home

Ensure that 'Installer Mode' has been activated (via the 'INST' button)�

Press 'LOW' for a low-rise or 'HIGH' for a high-rise home�

The yellow LED (see illustration) will flash in a pattern that indicates the

number of occupants: Once, twice (applies for 3 occupants as well) or 4

times (applies for 4 occupants or more)� Press 'LOW' or 'HIGH' respectively

again until the LED pattern matches the correct number of occupants�

Press the 'INST' button to exit 'Installer mode'�

RED (blinking slowly)

Not in network

GREEN (blinking slowly)

In network

Component is displayed if changes are being put through via the master�

DucoBox� Follow the guidelines in '10 essential tips' if the problem recurs continually�

In network, waiting for associated components

YELLOW (on) Initialising (system

WHITE or OFF

Normal

BLUE

ORANGE

L2000641 Installation guide for DucoBox Silent (Revision H | 13.07.2020)

RED (blinking rapidly)

Logging in

GREEN (blinking rapidly)

configuration in progress)

HIGH

LOW

INST

ENGLISH