Duco DucoBox Focus Посібник користувача
Переглянути онлайн або завантажити pdf Посібник користувача для Контролер Duco DucoBox Focus. Duco DucoBox Focus 2 сторінки.
Також для Duco DucoBox Focus: Посібник з монтажу (20 сторінок), Посібник з монтажу (16 сторінок), Швидкий старт (4 сторінок)
Друкувати сторінку
AUTOMATIC SETTING
The ventilation system is geared to obtaining good air quality automatically, based on CO
AUTO
readings (if there are sensors included in the system). This is achieved as energy-efficiently as possible,
by extracting polluted air only when necessary. Ensure that manual window ventilators are open.
MANUAL SETTINGS
With these, air quality readings are ignored and the system
extracts air in line with the percentages of maximum
capacity set out below. In the medium and high settings,
ensure that manual window ventilators are open.
Low
Medium
10%*
50%*
TEMPORARY
manual setting
→
Ventilation system to requested setting for:
• 1/2/3** x 15 min.* for a system without Tronic window ventilator(s)
• 1/2/3** x 8 hours* for a system with Tronic window ventilator(s)
PERMANENT
manual setting
→
Ventilation system to requested setting until
another setting is selected by the user
UNOCCUPIED SETTING
→
Ventilation system to low setting until
another setting is selected by the user
MEANING OF LED COLOURS
You will find comprehensive user instructions at
USER MANUAL
(= recommended)
High
100%*
15 min / 8 h =
30 min / 16 h =
45 min / 24 h =
(for operation with light-emitting buttons only)
Temporary
manual setting
Permanent
manual setting
Unoccupied setting
link.duco.eu/manual
Push button
LED
AUTO
OPERATION WITH
LED IN THE CENTRE
1 x
SHORT
2 x
PRESS
3 x
The LED will light up green for
1 second as confirmation.
1
LONG-PRESS
... until the LED lights up
green for 5 seconds.
2
LONG-PRESSES
... until the LED lights up green
for 5 seconds after each press.
* The times and percentages indicated are standard and may differ in line with system settings.
** Some systems do not contain temporary manual settings for pressing 2 and 3 times.
AUTO
AUTO
AUTO
and/or humidity
2
Touch button / LED
AUTO
OPERATION WITH
LIGHT-EMITTING BUTTONS
on
/
The LED for the selected setting will light
up bright white briefly as confirmation.
on
/
/
... until the 4 LEDs briefly light up
brightly. The selected setting will
light up
magenta
after that.
on
... until the 4 LEDs briefly light up
brightly after each press. The selected
setting will light up
cyan
Automatic setting
Preheating in progress
in ClimaTop 60 window ventilator
Please wait, initialising in progress
(after system restart)
en
/
after that.