Concierge ACMG10 Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу для Монітор Concierge ACMG10. Concierge ACMG10 4 сторінки.

VESA Mounting Bracket

Secure the 75 x 75 VESA mounting bracket to the panel

using 4 x M4 screws where the thread will be no longer

than 4mm into the panel.

After installing your ACMG10, please remove the two

plastic films protecting the front of the LCD.

Window Mounting (ACMG10WM) and Flush Wall Mounting (ACMG10FM) options are also

available, please consult your Concierge Dealer or visit

www.conciergedisplays.co

for

information on these mounting options.

IP network connection and addressing

When your Concierge ACMG10 panel powers up it will try to connect to a network.

The unit is configured for DHCP.

After powering up, the panel will show the IP Address details on the splash screen shown

below. If the unit does not show an IP address, and for additional configuration instructions

please refer to the User Guide available at:

https://conciergedisplays.co/quickstart/

Concierge recommends network and power connections by Power over Ethernet

installation. WiFi is turned off by default. To turn WiFi on, select Basic Setting on the

ACMG10 during boot up, default password is admin. Then follow the prompts to

active WiFi.

Recording your installation details

Your Concierge ACMG10 was supplied with a Concierge Details Card. Use this card

to record specific information about this panel like location and IP Address.

This information is important to anyone configuring and setting up the unit particularly if

there are multiple locations.

Concierge Displays Pty Ltd

+61 3 9012 6126

conciergedisplays.co



