AnyTone D868UV Посібник з оновлення прошивки - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з оновлення прошивки для Радіо AnyTone D868UV. AnyTone D868UV 2 сторінки.

The radio should not return to the Clock-Set screen display after updating,

you will have to redo the updating if it returns to the Clock-Set screen

display.

8. Reboot the radio when the update is finished.

Please put OFF the GPS and APRS to prevent radio go in TX when connect to

PC ,as it may cause the CPU or memory IC damage.

Important Notice:

Please make sure the codeplug is saved to PC before you do the update

and reset.

Rebooting the MCU

After updating the firmware, you need to reset to the radio

Main Control Unit (MCU).

Power off the radio first. Then power it on while holding the PTT and

the PF1 button below the PTT at the same time. The radio will start up

with a note on the display stating "MCU Reset".

*** Please Wait – and do not turn the radio off while it restarts ***

After the MCU reboot, you will have to set the time and date.

Use the P1 key to scroll through the date / time fields.

Up and Down arrow keys will allow you to change the information in

these fields. After you have the information entered use the Green key

to confirm the settings.

You will have to reload your saved code plug as the final step