AnyTone AT-D269 Посібник з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Двостороннє радіо AnyTone AT-D269. AnyTone AT-D269 17 сторінок. Digital dmr and analog vhf/uhf two way radio

Друкувати сторінку

4. PROGRAMMABLE FUNCTIONS

turn off signaling and squelch level, to direct monitor weak signal or ID not

matched signal. Repeat press this key to turn off monitor.

Note: In analog mode, the radio will emit white noise.

Alarm sending

4.12

In standby, press the key programmed as "Send Alarm" function, the radio

will announce "Alarm" and Alarm Number 1-5 plus alarm sound. Repeat

press this key can choose Alarm Number, then press PTT to send choosed

alarm sound to contact list or group members in current DMR channel.

Note: This function only valid for DMR channel.

Hot key 1-6

4.13

In standby, press the key programmed as "Hot Key X" function send

signaling for 5TONE, DT MF, 2TONE, remote kill, activation, SMS, remote

monitoring, prompt and other signaling.

»»For detailed settings, please refer to the one-key operation settings of the PC

software.

Work alone

4.14

In standby, press the key programmed as "Work Alone" to turn on this

function, the radio will announce.

Note: After turn on work alone function, the radio will send out alarm after

preset time. For detailed settings, please refer to the Work alone settings of

the PC software.

Local recording

4.15

In the standby state, press the button programmed as "local recording" to

enter the phrase recording mode, the radio will prompt "recording" and the

sequence number (1-25) of the current phrase to be recorded in the form of

voice prompts. Increase from 1.

After selecting the serial number you want to record, press and hold the

PTT key to speak to the MIC. Release the PTT key and the radio will use a

voice prompt to complete the recording.

Note: This function only works in digital mode.

Local recording playback/deletion

4.16

In standby mode, press the button programmed as "local recording

playback/deletion", the radio will prompt "recording playback" and the

serial number (1-25) by voice. The radio will jump directly to the recorded

entry and play the recorded voice directly. When the user is listening to the

playback voice, press the PTT key to send the current voice to the contact

or group called by default on the current channel. If you want to delete the

AT-D269 Digital DMR and Analog VHF/UHF Two Way Radio