DuctSox SkeleCore Pull-Tight Cable Посібник з монтажу
Переглянути онлайн або завантажити pdf Посібник з монтажу для Промислове обладнання DuctSox SkeleCore Pull-Tight Cable. DuctSox SkeleCore Pull-Tight Cable 16 сторінок.
Друкувати сторінкуSkeleCore Pull-Tight Cable
Installation Manual
Thank you for selecting a DuctSox SkeleCore Pull-Tight with Cable System. This installation manual will be helpful for
installing the system. The key to a successful SkeleCore Pull-Tight installation is using Tensioning Baskets to apply
tension to the fabric and to smooth the appearance. Sections of fabric will be labeled, assembled, bagged, and boxed
for shipping. Systems will include a drawing detail of the system identifying what is in each package and detailed
dimensions of support locations.
Overview
Inventory
Read through this guide thoroughly. Review the components that need to be assembled and installed. Review the
Engineering and Architectural drawings of the project while reading this guide, including the project-specific drawing
details provided by DuctSox.
Shipping/Receiving
In some cases the DuctSox support system is delivered to the job site ahead of the DuctSox fabric sections. Depending
on the size of a project or order, a DuctSox system will be shipped by common courier in a single brown box or several
boxes. Larger orders will be shipped in crates by a common freight courier. Each DuctSox length should be packaged
into individual plastic bags and labeled according to size and number of pieces. Other markings or labeling may also be
incorporated for larger or more complicated systems. Be sure you have determined all boxes are accounted for.
Unpacking
Inspect shipment carefully and make sure all components are accounted for by emptying packaging and examining
all contents. Note any missing or damaged pieces listed on the Bill of Lading and contact your courier and DuctSox
Representative.
Labeling
Each fabric section will have a tag near any zipper. The tag will include job number, ship date, diameter, section
number (if the total length is comprised of more than one fabric section), and total length.
Equipment Required:
• Drill
• Level
• Tape measure
• Marker or pencil
• Wrenches for cable clamps and eye bolts (5/16 in and 9/16 in)
• Flat (standard) screwdriver
• Cable cutter
• Rivet gun
Language: English
Publication: AMEN00417 2021-02-22