Anywave ATSC VHF 100W Посібник із швидкого старту - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Передавач Anywave ATSC VHF 100W. Anywave ATSC VHF 100W 17 сторінок.

ATSC VHF 100W Quick Start Guide
16. If using the Exciter Built-in remote web interface for remote control, please be
sure to set the Exciter to REMOTE mode (set CTL to RMT) before leaving the
transmitter site. The Remote/Local setting is located under the SYSTEM
submenu. Most of the Local TX controls are available on the remote web
interface, including On/Off, Raise/Lower power, etc. (refer to the Exciter user
manual for details). For the PA, both its Web Interface and its local touchscreen
can control its settings simultaneously.
ACT-PAVIII1-QSG-DOC-V1.1, 06/26/2018
Page 16 of 17