Dudley Wave S3 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Контролер Dudley Wave S3. Dudley Wave S3 8 сторінок. Smart flush actuator

Activation Detection Range (ADR) Configuration

The Activation Detection Range or ADR is the distance at which the unit rst

detects a user and illuminates ready for use. There are 3 modes of setup used

to congure the unit to its specic WC environment.

Default

The unit will give complete ushing functionality using the factory set default

range of 2m. However, if a permanent object such as an opposing wall or

cubicle door is within 2m, the unit will be permanently illuminated.

Automatic Setup

Sets the unit to ignore permanent objects within

the default 2m range. This procedure is suited to

enclosed WC spaces such as cubicles.

Step 1

Initiate the ADR scanning procedure by

simultaneously pressing both rear buttons.

The unit will begin to beep.

Step 2 (Automatic)

Whilst beeping, promptly place the unit onto the

mounting frame (no need to lock) and vacate the

area ensuring that any cubicle doors are closed.

Step 3

Immediately before scanning, the unit will beep

more rapidly and scanning will commence.

Ensure the area remains in its inactive state for

the duration of the scanning procedure.

Step 4

On completion of the scanning procedure the

unit will sound a long beep. The ADR is now

set just short of the nearest large static object.

Manual

To set a range shorter than the default 2m range.

This procedure is suited to open WC spaces such

as domestic bathrooms. Follow the automatic

setup procedure but replace Step 2 as below.

Step 2 (Manual)

Whilst beeping, promptly place the unit onto the

mounting frame (no need to lock). The installer

should stand in front of the unit at the

required ADR range for the duration of the

scanning procedure.

Automatic

Manual