DUDOFF CH-F2B Інструкція користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Інструкція користувача для Варильна поверхня DUDOFF CH-F2B. DUDOFF CH-F2B 12 сторінок. Vitroceramic hob

Друкувати сторінку

safety function must be deactivated by

pressing the Lock key until the indicator

light switches off.

Press On/Off key to switch the top

on. All the L displays relative to the

cooking zones switch on in the

by position.. The control unit remains

active for 10 seconds.

If within this time no cooking zone is

selected, the electronic device returns

automatically to the OFF position and

the above described operation must be

repeated to switch the cooking top on

again.

SWITCHING

ZONES

Select the desired cooking zone and

press key [-] to set the plate to position

9 (max. power) or key [+] to set the

plate to position 1 (min. power). Once

this operation has been completed you

can adjust the temperature with the

[+] or [-] keys. The power of the single

cooking zone can be adjusted in 9

different positions and will be shown on

luminous display L with a number from

"1 to 9".

EXTENDABLE COOKING ZONES

Depending on the model, one or two

cooking areas may have a second

circuit (extension

the

key to activate the double circuit

area. Use the [+] and [-] keys to adjust

the power level.

RESIDUAL HEAT

If the temperature of the cooking zone

is still high (over 50°) after it has been

switched off, the relative display L will

indicate the

signal (residual heat).

The signal will only switch off when the

burn risk in no longer present.

stand-

THE

COOKING

see Fig.9). Press

TIMER

This

function

the time (from 1 to 99 minutes) for

automatically switching the selected

cooking zone off.

In order to activate the timer, switch the

desired cooking area on and adjust the

temperature, press keys [+] or [-] in the

timer area to adjust the cooking time.

Confirm by pressing the [+] or [-] key

in the previously switched-on cooking

area. The symbol

display of the cooking area where the

timer is activated and the countdown

will be shown in the display M (Fig.9).

Switch the relative cooking area off in

order to deactivate the timer, or press

keys [+] or [-] of the cooking area, then

press simultaneously keys [+] or [-] in

the timer area.

CONTROL PANEL LOCK

It is possible to block the controls

to prevent the risk of unintentional

modification of the settings (children,

cleaning etc.). By pressing the Lock

key, the controls are blocked and the

relative warning light I switches on

(Fig.9) To release the controls and

change

the

settings

cooking), the Lock key must be

pressed. The cooking top can however

be switched off even when the controls

block is activated. In this case the

controls block remains active when the

top is switched on again.

SWITCHING OFF THE COOKING

ZONES

To switch a cooking zone off, press

simultaneously the [+] and [-] key of the

relative zone, or press the [-] key until

reaching position

allows

establishing

will appear on the

(e.g.interrupt