Anywhere Cart AC-45 Посібник з використання - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з використання для Зарядний пристрій Anywhere Cart AC-45. Anywhere Cart AC-45 8 сторінок.
Друкувати сторінку15m
1
Within 5 seconds of plugging in your cart's power
cord, the 15 Minute Cycle Timer on the AC-PLUS
will charge half of the devices in your cart at once. It
will begin to charge devices which are plugged into
power strips on the "A" circuit. Then, after 15 minutes,
devices which are on the "B" circuit will charge. This
continuous cycle will remain in operation until your
cart's External Illuminated LED Power Button is pressed
and no longer illuminates.
1
Within 5 seconds of plugging in your cart's power cord,
your INTELLI-SENSE Smart Charging System will initiate
an test of your devices charging level requirements.
Devices which are plugged into power strips that draw
the most power will take priority and can take up to 2
hours before switching to the next set of outlets. Once
devices are fully charged, the system will remain in a
trickle charging state, maintaining your devices battery
levels.
If you prefer, a 30 Minute Cycle Mode is available by
switching the Mode Selection Switch to the LEFT. T his
will start to charge devices which are on the "A" circuit.
After 30 minutes, devices which are on the "B" circuit
will charge. This continuous cycle will remain in operation
until your cart's External Illuminated LED Power Button is
pressed and no longer illuminates.
© 2017 Anywhere Cart | 42400 Winchester Rd Temecula, CA 92590 | 888-650-4488 | www.AnywhereCart.com
Ac-plus
15 MINute Cycle Timer
The AC-PLUS is equipped with a 15 Minute Cycle Timer Charging System. Its designed
to simplify charging your devices without complicated mode settings or adjustments.
4
2
3
AC-plus-T & AC-45
Smart Charging System
The AC-PLUS-T and AC-45 are equipped with the INTELLI-SENSE Smart Charging
System. Its designed to more efficiently charge your devices while also creating a plug
and play environment.
5
4
2
3
Specifications subject to change without notice
5
1. Power Cord Inlet
2. Internal Power Button
3. LED Indicators
4. External Switch Cable
6
1. Power Cord Inlet
2. Internal Power Button
3. Mode Selection Switch
4. External Switch Cable
5. LED Indicators
6
7
5. Cycle Outlets "A"
6. Cycle Outlets "B"
7. Auxiliary Outlets
(Always ON)
7
8
6. Cycle Outlets "A"
7. Cycle Outlets "B"
8. Auxiliary Outlets
(Always ON)