Anywhere Cart AC-MAX Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Зарядний пристрій Anywhere Cart AC-MAX. Anywhere Cart AC-MAX 9 сторінок. 40 bay secure smart charging cart
Друкувати сторінкуFor units shipped June 1, 2018 forward
Intelli-Sense System Overview
USER GUIDE
MAX, AC-45, AC-PRO-II and AC-MANAGE are
NSE Smart Charging System. This system will initiate an
el requirements. Devices which are plugged into power
THE ELECTRICAL SYSTEM IS DESIGNED TO HANDLE A MAXIMUM OF 14 AMPS.
r will take priority. Once devices are fully charged, the
harging state, maintaining your devices battery levels.
7
tch Cable
Power Input
ors
tlets (Always ON)
Internal Power Button
Quick Start Guide
QUICK START TIPS
1. Plug in device adapters so there are an
equal number of devices in Group A
and Group B.
2. Make sure the Mode Selection Switch is
set to "SMART" mode.
1
3. Plug in cart.
The Intelli-Sense timer will automatically
sense the charging needs of the cart and
1. Power Cord Inlet
start charging in the most effcient and
2. Internal Power Button
3. Mode Selection Switch
quickest method.
How It Works
Group Outlets "A" Group Outlets "B"
T:
7 Amp load
wer on for 8 seconds in sequence then enter the
ON
À
5 Amp load
n 9A:
OFF
nt draw will power on, while the group with less
rent draw difference is within 0.5A, the system
5 Amp load
total current is less than 9A, all outlets will
ON
À
4.5 Amp load
A:
ON
he same time.
ed in case a new device is added.
NOTE: If wattage exceeds 14 Amps or about 1400 Watts at one time, the charging system may
With the Mode Selection Switch set to SMART:
not operate correctly. Review your device's AC Adapter wattage, multiplying it by 20.
888.650.4488
Group Outlets "A" and Group Outlets "B" power on for 8 seconds in sequence then enter the
AnywhereCart.com
following modes depending on current draw.
45 Watts
If the total current draw is greater than 9A:
X
The group outlets with the highest current draw will power on, while the group with less
20 Devices
current draw remains OFF. Once the current draw difference is within 0.5A, the system
900 Watts
will switch to the other group. When the total current is less than 9A, all outlets will
power on at the same time.
If the total current draw is less than 9A:
© 2020 Anywhere Cart | 42035 Zevo Drive, Temecula CA 92590, USA | 888-650-4488 | www.AnywhereCart.com
Group "A" and Group "B" power on at the same time.
The total output is continuously monitored in case a new device is added.
INTELLI-SENSE SMART CHARGER
6
8
7. Group Outlets "A"
8. Group Outlets "B"
The AC-PLUS-T, AC-SLIM, AC-MAX, AC-45, AC-PRO-II and AC-MANAGE are
equipped with the INTELLI-SENSE Smart Charging System. This system will initiate an
test of your devices charging level requirements. Devices which are plugged into power
strips that draw the most power will take priority. Once devices are fully charged, the
system will remain in a trickle charging state, maintaining your devices battery levels.
4
5
3
2
4. External Switch Cable
5. LED Indicators
6. Auxiliary Outlets (Always ON)
5.5 Amp load
OFF
5.5 Amp load
ON
À
4.5 Amp load
OFF
4.5 Amp load
ON
Subject to change without notice
42035 Zevo Drive, Temecula, CA 92590
Mode Selection Switch
External Cable Port
For units shipped June 1, 2018 forward
Intelli-Sense System Overview
Within 5 seconds of plugging in your cart's power cord, your
INTELLI-SENSE Smart Charging System will initiate an test of
your devices charging level requirements.
Devices which are plugged into power strips that draw the
most power will take priority and can take up to 2 hours before
switching to the next set of outlets. Once devices are fully
charged, the system will remain in a trickle charging state,
7
8
maintaining your devices battery levels.
7. Group Outlets "A"
8. Group Outlets "B"
With Mode Selection Switch set to SMART:
Group Outlets "A" and Group Outlets "B" power on for
Quick Start Guide
8 seconds in sequence then enter the following modes
1. Plug in device adapters so there are an
depending on current draw.
equal number of devices in Group A
If the total current draw is greater than 9A:
and Group B.
The group outlets with the highest current draw will
power on, while the group with less current draw remains
2. Make sure the Mode Selection Switch is
set to "SMART" mode.
OFF. Once the current draw difference is within 0.5A, the
system will switch to the other group. When the total
3. Plug in cart.
current is less than 9A, all outlets will power on at the
same time.
The Intelli-Sense timer will automatically
If the total current draw is less than 9A:
sense the charging needs of the cart and
start charging in the most effcient and
Group "A" and Group "B" power on at the same time.
quickest method.
The total output is continuously monitored in case a new
device is added.
65 Watts
X
20 Devices
1300 Watts
Cycle Outlets "A"
Cycle Outlets "B"
Auxiliary Outlets
(Always ON)
6
75 Watts
X
20 Devices
1500 Watts