2connect M930Z Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Зчитувач штрих-коду 2connect M930Z. 2connect M930Z 2 сторінки.

Друкувати сторінку

2connect M930Z Посібник із швидкого старту

1.How to use

Maintain a 10-40° bevel angle in the horizontal direction of the scanner and

bar code for optimal scanning results.

Aiming - Correct

Aiming - Wrong

2.Scanner Features

LED Indicator

Scan Window

Beeper

Scan Trigger

Data Port

3.Interface cable's Installing and Removing

Data cable connection:

1. The data cable on the bottom of the scanner is not allowed to be pulled

out;

2. Because the data cable is integrated with the scanner interface, the data

cable cannot be pulled out.

4.Packing List

1* Scanner.

1* Interface Cable.

1* Quick Start Guide.

If you need to use the detailed manual, Please contact the bar code

scanner vendor.

How to use the parameter barcode: scan corresponding bar codes to set

up the scanner and the scanner will beep once.

5.System Setting

1.Reading the "Enable conﬁguration code" barcode enables the barcode scanner to open

and conﬁgure by reading a speciﬁc barcode (conﬁguration code function). After the

function is turned on, the parameters of the barcode scanner can be modiﬁed by reading

one or more conﬁgure codes.

2.After reading the "Disable conﬁguration code", most of the conﬁguration code

processing functions will be disabled by the barcode scanner. In this state, only the "

Enable conﬁguration code" code can be read and processed.

Enable Conﬁguration Bar code

Disable conﬁguration Bar code

6.Common settings

The content of the conﬁguration code can be output. After reading the "output conﬁguration

code content" and setting it successfully, the content will be output to the host when reading

the conﬁguration code; after reading the "no output conﬁguration code content" and setting

successfully, the barcode scanner will no longer output the conﬁguration code content. After

the barcode scanner is restarted, no matter what the previous settings are, it will return to the

state of "no output of conﬁguration code content".

Transmit Configuration Bar Code Data

Do not Transmit Configuration Bar Code

Data

7.Common Setting

Configuration Bar Code

Restore to Factory Default

Note: please use the "restore factory default" function carefully. After reading this conﬁguration

code, you will lose the current parameter setting and replace it with the factory default value.

8.User default settings

1.In addition to the factory default settings, you can save the settings you often use as user

default settings.

2.Reading the "save current settings as user default settings" code will save all parameters

of the barcode scanner as the user's default settings. If there is user default conﬁguration

information on the barcode scanner, the current conﬁguration information will replace the

original user default conﬁguration information after this operation. Reading "restore to user

default settings" switches the module to the state of user default settings.

(Note: after restoring the factory default settings, the previously saved user default settings

will not be lost.)

Save current settings as user default

Restore to user default

9.Interface setting

Serial port

HID-KBW

USB COM