Anzzi Perfection is our Tradition SH-AZ032 Посібник з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з монтажу для Сантехнічний виріб Anzzi Perfection is our Tradition SH-AZ032. Anzzi Perfection is our Tradition SH-AZ032 2 сторінки.

Друкувати сторінку

Step 1

Faucet installation

1.Remove the protect cover #5a and take out the screw #4 with the screwdriver, then remove the protect cover #5b.

2.Connect pipes with faucet as photo, pay attention to the connection of hot and cold water supply pipe.

3.Let the water run for one minute. Check all connections for leakage.

4.Apply teflon tap to the shower arm, put flange and connect it to water supply pipe, after fixing the shower arm,

screw the shower head to the shower arm. ATTENTION: don't forget the o-ring between the shower arm

and the shower head. Put the trim plate, fix it with screw, tighten it with screw driver, and fix the handle with

screw, finally put the index. Then assemble the outlet spout, loose the screw and connect the spout to the water

supply pipe then tighten the screw again with allen key.

O-ring

Step 2

Checking and testing

Check all connections at arrows for leaks, re-tighten it if necessary.

BUT DON'T OVERTIGHTEN

Step 3

Cleaning and care

Daily cleaning and care are required in order to keep the product shining and

properly working.

Clean it with water and dry it with soft cloth.

Clean the product with gentle liquid or glass cleaner.

Don't use acid cleaner.

Don't clean with abrasive material, abrasive paper or knife.