Duevi SINT-13 Посібник зі встановлення та використання - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник зі встановлення та використання для Приймач Duevi SINT-13. Duevi SINT-13 8 сторінок. Wireless voice synthesis receiver with activation
Друкувати сторінку
Remote controls
It is possible to store up to four radio activators or keyboard users on memory position 1. These radio
codes are memorized in four different internal sub-spaces (circular queue).
Learning remote controls/users > during the learning stay in memory position 1 to store all the remote
controls/users: the first, the second, and so on.
Add a remote control/user > enter in learning position 1 and if one or more sub-spaces are free, SINT-
13 automatically prepare to store in the first free position without overwrite/delete previous learned
devices.
Change a remote control/user > to learn a remote control/user code with all the sub-spaces full (for
example to substitute a lost or damaged remote control), enter in memory position 1 and proceed as
normal learning: the first code will be overwritten.
CTSR/CTSR LIGHT detector
Each CTSR/CTSR LIGHT detector uses one memory position, without difference of which alarm element
(on-board reed, secondary contact, roller and shock) give alarm.
Follows the factory settings for memory position and messages associated:
Memory position
1
2
3
4
5
6
7
8
Exit from "radio codes learning": open the jumper JP2.
6
Device
Remote control / user 1
Remote control / user 2
Remote control / user 3
Remote control / user 4
Detector 1
Detector 2
Detector 3
Detector 4
Detector 5
Detector 6
Control panel or TSR
Message
1.
(arming) "External area activation"
2. (disarming) "External area deactivation"
3. "Sensor 1 detection"
4. "Sensor 2 detection"
5. "Sensor 3 detection"
6. "Sensor 4 detection"
7. "Sensor 5 detection"
8. "Sensor 6 detection"
9. "System TOTAL armed"
10. "System disarmed"
11. "System Partial 1 / Partial armed"
12. "System Partial 2 / External armed"
13. "System Partial 3 armed"