Dancover COMMERCIAL TITAN Peak 240 Series Посібник - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник для Комплект для теплиці Dancover COMMERCIAL TITAN Peak 240 Series. Dancover COMMERCIAL TITAN Peak 240 Series 16 сторінок.
Друкувати сторінкуManual
FASTENING OF COVERING
Fasten the pieces of
covering on the end to
the angles with the use of
washers and self-tapping
screws (fig.8.2).
Places of fastening of
pieces of covering to each
other with the use of a
permanent polycarbonate
connecting shape are
shown in fig.8.3.
fig. 8.3
Using a knife, adjust
covering pieces to arcs 4
and girder 20, and then
install sealing profile in
accordance with fig.8.4
22
washer 32х6,3
self-tapping screw
end
covering
angle
fig. 8.2
permanent
connecting shape
end seal
end
covering
Fig. 8.4
Fig. 8.5
- places of fastening
2к, 2кн
of door seals.
-
-
fastening of penofol.
Seals are installed
accordance with fig. 8.5.
8.6
4
gate
Fig. 8.6
gate
penofol
The outermost panels of
covering are installed in
accordance with fig. 8.7.
4
FASTENING OF COVERING
places
of
in
door seal
5мм
end seal
gate
4
fig. 8.7
Manual
door seal
hinge
gate
gate
penofol
Install lugs and handles
on the door
23