cascade corporation 55C Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Навантажувачі cascade corporation 55C. cascade corporation 55C 12 сторінок. Integral sideshifter
Друкувати сторінкуI
NSTALLATION
Truck Requirements
Truck Relief Setting
2000 psi (140 bar) Recommended
3500 psi (240 bar) Maximum
Truck Flow Volume
35C, 55C, 70C
Cascade Integral Sideshifters are compatible with SAE 10W
➀
petroleum base hydraulic fluid meeting Mil. Spec. MIL-0-5606
or MIL-0-2104B. Use of synthetic or aqueous base hydraulic
fluid is not recommended. If fire resistant hydraulic fluid is
required, special seals must be used. Contact Cascade.
Flow less than recommended will result in slow sideshift speed.
➁
Flow greater than maximum can result in excessive heating,
➂
reduced system performance and short hydraulic system life.
Recommended
Hydraulic Supply
The Integral Sideshifter requires the hydraulic supply
arrangement shown below. All hoses and fittings should
be No. 6 with 7/32 in. (7 mm) minimum ID.
6014809-R7
➀
Min.
Recommended
➁
1 GPM
2 GPM
(7.5 L/min.)
(4 L/min.)
GA0157.eps
Max.
➂
3 GPM
(12 L/min.)
Auxiliary Valve Functions
Check for compliance with ITA
(ISO) standards:
GA0094.eps
A
Mast Single Internal Reeving
A
GA0158.eps
Tilt Forward
Hoist Down
Sideshift
Left
Hoist Up
Sideshift
Tilt
Right
Back
5