cascade corporation 55H Посібник з монтажу - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з монтажу для Навантажувачі cascade corporation 55H. cascade corporation 55H 12 сторінок. Fork positioner

Друкувати сторінку
I
NSTALLATION
12
Adjust forks for equal movement
(if required)
NOTE: Attachment is Factory-adjusted for equal
fork movement when operated at recommended
pressure and flow rate at normal operating
temperature.
A
B
C
13
Inspect fork hooks and
carriage bar clearance
NOTE: Use go/no-go Wear Gauge Part No.
209560 (Class II) or 209561 (Class III).
A
B
C
8
Locate flow restrictor fitting on RH cylinder
(1 flow restrictor only used).
Open and close forks fully and look for
unequal fork movement.
Loosen jam nut and adjust until RH fork
moves equally with LH fork. Tighten jam nut.
Inspect the fork lower hooks and
carriage bar. If the gauge fits between
the carriage bar and lower hook, repair
or replacement is needed.
Inspect the upper carriage bar. If the
gauge arrow touches the carriage bar,
repair or replacement is needed.
Inspect the fork upper hooks. If the
gauge arrow touches the hook, repair or
replacement is needed.
FP0625.ill
Back (Driver's) View
FORK LOWER HOOKS, CARRIAGE
Wear
Gauge
OK
UPPER CARRIAGE BAR
OK
FORK UPPER HOOKS
OK
Flow
A
Restrictor
Fitting
FP0631.ill
6039153 Rev. 0