Danfoss AK-SC255 Посібник з усунення несправностей - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з усунення несправностей для Контролер Danfoss AK-SC255. Danfoss AK-SC255 8 сторінок. Com-trol local bus support
Також для Danfoss AK-SC255: Посібник з монтажу (7 сторінок), Посібник користувача (10 сторінок)
Друкувати сторінку
AK-SC255
Keypad not responsive
Ethernet Doesn't Work
Web Browser Issues
Authorization Code Issues
For Danfoss Technical Support call +1-410-931-8716.
©Danfoss (USCO / MKS), 04- 2010
Troubleshooting Guide
•
Try resetting the AK-SC255
•
If that fails to regain control of the keypad contact Danfoss Technical Support
for further assistance.
•
Check to see that your Ethernet connection is a valid one.
•
Check the plug in connection (lower left most connector, Fig. 8) on the
9AK255CONNBD (connector board).
•
Check configuration by going to Communications, Internet and Status to see
that your unit has a valid IP Address.
•
If you are just setting this feature up you may need to reset the unit for the
new setting to take effect.
•
If none of these things has helped call Danfoss Technical Support for further
assistance
•
The Web browser is currently supported only in the "E" and "CS" versions of 255
applications. If you have one of these 2 versions and have concerns about the
correct functioning of your Web Browser contact Danfoss Technical Support
for further assistance.
•
Check to make sure the keypad is functioning correctly
•
If the database has been lost the default is 12345 Enter, 50 Enter
•
If this does not work, call Danfoss Technical Support for assistance.
•
The last option is to contact the "chain" head quarters, they are responsible for
maintaining or dispensing Auth codes.
USCO.EI.RF0.D1.22 / 521U0152
Figure 8
7