3rd Power Dream Weaver 112 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач 3rd Power Dream Weaver 112. 3rd Power Dream Weaver 112 15 сторінок. Combo & head

Друкувати сторінку

P R E C A U T I O N S & W A R N I N G S

Your 3RD POWER Ampliﬁer is a professional musical instrument ampliﬁer. The information

contained herein is current at the time of publication. However, speciﬁcations are subject

to change without prior notice.

• READ THESE INSTRUCTIONS.

• KEEP THESE INSTRUCTIONS.

• HEED ALL WARNINGS.

• FOLLOW ALL INSTRUCTIONS.

• YOUR AMPLIFIER IS LOUD!

EXPOSURE TO HIGH SOUND VOLUMES MAY CAUSE PERMANENT HEARING DAMAGE ! Practice "safe

listening."

• No user serviceable parts inside. Refer service to qualiﬁed personnel. Always unplug AC power be-

fore removing chassis.

• If you intend on operating this equipment outside of the USA: Always insure that unit is wired for

proper voltage. Make certain all connections and grounding conforms with local standards. Make

certain that you have obtained authorization to operate prior to connecting to power supply.

• WARNING: Vacuum tube ampliﬁers generate heat. To insure proper ventilation always make certain

there is at least four inches (100mm) of space behind the rear of the ampliﬁer cabinet.

• Keep away from curtains or any ﬂammable objects.

• WARNING: Do not block any ventilation openings on the rear or top of the ampliﬁer. Do not impede

ventilation by placing objects on top of the ampliﬁer which extend past the rear edge of its cabinet.

• WARNING: Do not expose the ampliﬁer to rain, moisture, dripping or splashing water. Do not place

objects ﬁlled with liquids on or nearby the ampliﬁer.

• WARNING: Always make certain proper load is connected before operating the ampliﬁer. Failure to

do so could pose a shock hazard and may result in damage to the ampliﬁer.

• Do not expose ampliﬁer to direct sunlight or extremely high temperatures.

• Always insure that ampliﬁer is properly grounded. Always unplug AC power cord before changing

fuse or any tubes. When replacing fuse, use only same type and rating.

• Avoid direct contact with heated tubes. Keep ampliﬁer away from children.

• Be sure to connect to an AC power supply that meets the power supply speciﬁcations listed on the

rear of the unit. Remove the power plug from the AC mains socket if the unit is to be stored for an

extended period of time. If there is any danger of lightning occurring nearby, remove the power

plug from the wall socket in advance.

• To avoid damaging your speakers and other music equipment, turn off the power of all related

equipment before making the connections.

• Do not use excessive force in handling control buttons, switches and controls. Do not use solvents

such as benzene or paint thinner to clean the unit. Wipe off the exterior with soft cloth.