DUKWIN DK Series Посібник - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник для Аксесуари DUKWIN DK Series. DUKWIN DK Series 15 сторінок. Watch winder

Direction Setting

Clockwise

Counterclockwise

Bi-directional

Finally return to the previously setting mode

4 Winding Mode

1. The TPD value is between 300 - 2300. By turn up and turn down to change

TPD value, over 300 TPD returns to 2300 TPD cycle.

2. TPD Calculation Method: 10 turns per cycle

24-hour mode operating cycle (minutes) =1440/ (TPD/10 turns);

12-hour mode operating cycle (minutes) =1440/ (TPD/10 turns) /2;

8-hour mode operating cycle (minutes) =1440/ (TPD/10 turns) /3;

e.g: TPD set to 650, clockwise, 24 hours mode. Then the running period (minutes)

=22.2, that is, each cycle is 22.2 minutes.

Cycle execution: the time required for the motor to rotate clockwise 10 times

+ the motor stop time = 22.2 minutes. In the 12 (8 hours) working mode, the

cycle runs for 12 (8 hours) hours and then stops; stops for 12 (16 hours)

hours, and then restarts the cycle.

Note:

There is no magic number of rotations that will wind your watch. Things such

as how active you are, how many complications your watch has, how

frequently you use the chronograph function, how frequently you wear your

watch, the watch make, how long it has been since it was last serviced and a

host of other variables will impact what your watch requires to stay wound.

And a watch winder won't wind a watch that is fully stopped. So, you need to

manually wind the timepiece to get it running ﬁrst. You will have to make this

determination by trying the various settings.

New Watch Mode Working Chart

Working Time

4 hours

Clockwise for 2 hours and

Counterclockwise for 2 hours

Rest Time

8 hours