Dulytek DHP7 Інструкція з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Dulytek DHP7. Dulytek DHP7 12 сторінок. Heat press
Друкувати сторінку
INSTRUCTION MANUAL: DHP7
SAFETY PRECAUTIONS
HANDLING PRECAUTIONS
Dulytek Equipment
www.dulytek.com
(continued)
•
Remove dust around the plug and power cord with a dry cloth. If the
surruounding is dusty, humid, or oily, short-circuit may occur, causing a
fire.
•
DO NOT remove the machine cover.
•
DO NOT disassemble the press or make any modifications to the
equipment.
•
The press must be operated on a hard, level surface, away from its
edges to prevent accidental tipping over.
•
Work area must be kept clean, tidy, and free of obstructions to the press
moving parts.
•
Always attach the power cord to the press first, then plug it into the wall
outlet.
•
To unplug the press, turn OFF all controls and switches, only then
remove the plug from the outlet.
•
DO NOT touch the press's hot surfaces. Use heat-resistant gloves or
tools. Care must be exercised as burns can occur from touching platens.
•
Keep your hands and other body parts away from the press moving parts
to prevent injury.
•
This press comes with a power cord that fits into a standard household
3-prong outlet (110V American market). DO NOT attempt to use the
equipment with a two-prong electrical cord or any other way without
proper grounding.
•
DO NOT exceed the rated capacity.
•
Contact DULYTEK if the equipment does not start or if smoke or unusual
odors are detected.
•
Always turn the machine OFF and unplug it when done using.
Email: [email protected]
© 2018 Dulytek
All rights reserved
PAGE 4