Dulytek DW4000 Інструкція з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Dulytek DW4000. Dulytek DW4000 13 сторінок. Heat press

INSTRUCTION MANUAL: DW4000

OPERATING INSTRUCTIONS

PREPARING

AND STARTING

THE PRESS

SETTING

CONTROL

PANELS

Dulytek Equipment

www.dulytek.com

1. Prepare materials you wish to press.

2. Insert the AC cord that came with the product into the press AC power

cord socket and then plug its other end into an electrical outlet (110V).

3. Flip the ON/OFF switch

and

light up.

The press comes with two control panels,

The top platen temperature is set using the control panel

tom platen temperature - the control panel

to set temperature either in Fahrenheit or Celsius degree. The press timer is

set using the control panel

desired press settings:

1. Press SET button on the first control panel (Figure 1) to get into the tem-

perature setting mode. You should now see "P - 1" on the display (Figure

2).

2. Press UP or DOWN buttons to select the desired temperature (Figure

3). The selected temperature is shown in green on the second line of the

display.

Tip: Enter the temperature either in °F or °C; you will be able to select the

temperature scale later.

Figure 1

Press SET button again (Figure 4) to go into the press timer settings

mode. Now, you should see "P - 2" on the display (Figure 5).

to turn the press on. The control panels

and

. Both control panels allow you

. Please follow the steps below to record the

Figure 2

, and the bot-

Figure 3

PAGE 8