Danfoss VLT MCD 600 Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Контролер Danfoss VLT MCD 600. Danfoss VLT MCD 600 8 сторінок. Remote control panel and mounting kit

Друкувати сторінку
Installation guide | Remote VLT® Control Panel LCP 601 and
Mounting Kit
The remote LCP can be safely connected or removed while the soft starter is running. It is not necessary to remove mains or
control voltage.
If parameter 1A Command Source is set to Remote LCP, removing the remote LCP causes a trip.

2.4 Mounting Diagram

Drill 4 mounting holes for screws (1 in each corner) and 2 holes for the DB9 connector.
The image is not to scale. Dimensions are given with the faceplate removed.
Danfoss A/S © 2018.06
N O T I C E
N O T I C E
N O T I C E
Installation
AN265232431650en-000101 / 175R1177 | 5