CashCode AMZ-1100 Інструкція з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Валідатор банкнот CashCode AMZ-1100. CashCode AMZ-1100 3 сторінки. New 5 and 10 dollar upgrade kit

Друкувати сторінку

STEP 4:

Locate the corner slots in the socket and insert the hooks of the extraction tool. While

gently squeezing the tool, the chip can be lifted out of the socket. Pay attention to the

fact that one corner of the chip has a chamfered edge. The socket also has a corner to

fit this edge.

HOOKS

STEP 5:

Locate the chamfered edge on the new chip, place the new chip in the socket and

press down. NOTE: The chip should go down into the socket with little effort. DO NOT

FORCE IT. DO NOT ALIGN THE CHIP ACCORDING TO THE POSITION OF THE

LABEL. MATCH THE CHAMFERED EDGE.

NOTE: 24 Volt models use US3B-S30 or US4B-S30 CPU chip.

STEP 6:

DIP switch settings do not change. Re-install the cover plate and your cassette, and

apply the update sticker to the outside of your validator for reference.

STEP 7:

Power up the validator and begin accepting the new $ 5 and $ 10 bills.

CashCode - Installation Instructions for the New $ 5 and $ 10 upgrade kit

CPU Chip

US2A_S30

US4A S30

Stacker models AMZ-154, AMZ-PLUS and AMZ-1100

Page 3 of 3

INSERT

EXTRACTOR

TOOL HOOK

HERE

CHAMFERED

EDGE

Prom Chip

US6R

_S30

CHAMFERED EDGE

INSERT

EXTRACTOR

TOOL HOOK

HERE