Aolait AL1019WZ Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Ді-джейське обладнання Aolait AL1019WZ. Aolait AL1019WZ 12 сторінок. 19*12w moving head beam

Друкувати сторінку

Safety Instructions

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction booklet.

Unpack and check carefully there is no transportation damage before using the unit.

Before operating, ensure that the voltage and frequency of power supply match the

power requirements of the unit.

It's important to ground the yellow/green conductor to earth in order to avoid electric

shock.

The unit is for indoor use only. Use only in a dry location.

The unit must be installed in a location with adequate ventilation, at least 50cm from

adjacent surfaces. Be sure that no ventilation slots are blocked.

Disconnect main power before replacement or servicing.

Make sure there are no flammable materials close to the unit while operating as it is fire

hazard.

Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but

always by taking its base.

Maximum ambient temperature is Ta: 40 . DO NOT operate it where the temperature is

higher than this.

Unit surface temperature may reach up to 85 . DO NOT touch the housing bare-hand

during its operation. Turn off the power and allow about 15 minutes for the unit to cool

down before replacing or serving.

In the event of serious operating problem, stop using the unit immediately. Never try to

repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or

malfunction. Please contact the nearest authorized technical assistance center. Always

use the same type spare parts.

DO NOT touch any wire during operation as high voltage might be causing electric shock.

Please read carefully the instruction, which includes important

information about the installation, usage and maintenance.